Broken knives are easy to damage attachments in construction waste

Every time before the construction waste is started, it is necessary to carry out no-load operation and check the pipeline for leaks or other abnormal phenomena to avoid damage to the wearing parts. Operators should periodically inject new oil into the fragile parts of construction waste to maintain the lubricity of the consumables and replace the butter when needed. The broken knife is an accessory that is easily damaged in the construction waste. During the crushing process, if the material is mixed with other iron materials and impurities, the blade will be damaged, so a filter is installed at the inlet. Screen out the material. If you want to extend the use time of Construction Waste Crusher consumable parts, an effective method is to ensure the stability of the voltage during operation, not to be high or low, and to avoid overloading the equipment for a long time. Construction waste is a machine used to smash construction waste. The so-called construction waste is what we usually call waste concrete, as well as masonry. It is generally believed that the value of construction waste itself is not large, but waste concrete and masonry can be re-constructed after construction, such as concrete, floor tiles, wall panels, etc., can be applied to the basement road. At the same time, the construction waste is also saved a lot of landfills, avoiding soil damage and effectively protecting the environment. Based on these two points, construction waste has become the environmental guardian of the machinery industry. Reasonable operation of construction waste is broken to ensure long-term stable operation of the equipment during the production process, and at the same time, the wearing time of the wearing parts can be prolonged. Therefore, there is still a need to understand some ways to maintain consumables.

评论

发表评论

此博客中的热门博文

Artificial aggregate production process and advantages and disadvantages

Wool sand making machine by crushing, screening, grinding, washing the resulting sand and gravel. In the absence of natural sand areas, often using artificial aggregate pouring concrete. Artificial aggregate production process are: wool mining, processing coarse aggregate, fine aggregate processing, screening, after washing reserves and transportation. Advantages of artificial aggregate are: ① wool stope nearest arrangements, reduce storage, loading and transport links, saving investment; ② to adjust production mix than the aggregate of all levels make full use of wool, save mining cost; ③ artificial aggregate particle size distribution is good, save cement, fresh surface roughness to increase bond strength, good mechanical properties. The disadvantage is the need to increase drilling blasting, crushing, sieving, washing, sand and other processes, the process is cumbersome, install more equipment and a greater direct costs of the system. Wool sand by crushing, screening, grinding, wa
阅读全文

Raymond Mill grinding system new advantages

Raymond Mill is a kind of grinding equipment that we commonly use in industrial ultrafine mill . It is suitable for limestone, calcite, marble, talc, gypsum, barite, fluorite, zeolite, manganese ore, ilmenite, phosphorus Minerals, bentonite, starch, kaolin and other stones with a hardness of less than Mohs 7 are ground and used in a wide range of applications, all of which are inextricably linked to its new grinding system. So what technology is applied to the grinding system used by Raymond Mill? 1. The new technology adopts a new vertical roll device. The grinding roller and the grinding ring are always in balance during the grinding process to form a uniform line contact grinding zone. The height of the grinding roller and grinding ring is increased from the original 160 mm to 200 mm, which increases the grinding contact area to a greater extent. 2. The classifier adopts a forced turbine classifier to extend the granularity of the finished product from the original 80-325 mesh range
阅读全文

New sand maker consolidates infrastructure construction

Since the 18th National Party Congress, our country has been inclined tocontinue to invest heavily in infrastructure to promote economicbooming, which will further expand the market demand for vsi sand making machine and gravelaggregate. In the face of the huge gravel aggregate demand, it isnecessary for gravel equipment R D manufacturer to activelyprepare for high-tech sand making machine to help the rapid development of economy. Sand making equipment is the key to the production of high-quality sandand gravel aggregate, the quality of sand and gravel aggregates directlyaffects the quality of infrastructure works. For a long time, theoverall technical level of sand making is low; facing increasinglystringent technical and quality requirements in the market, China sandmaking machine manufactures require to take active innovation, furtherincrease R D investment on technological application to meet thehigh standards and high demand of the market. Hongxing machine deeply understands
阅读全文