Sanding machine running-in period should pay attention to what

As with cars, sand making machine and other machinery and equipment before the formal work also has a period of running-in debugging. Running-in period of mechanical equipment is also called go-ahead, generally refers to the mechanical parts in the initial operation of contact, friction, occlusion process. Run-in period can be adjusted to enhance the operation of various parts of machinery and equipment with the ability to adapt to the environment, and wear parts uneven convex parts. The advantages and disadvantages of sand making equipment running in, sand making equipment life, safety, economy will have a significant impact. Although the sand making equipment has also been put into operation at the factory, but the surface of the parts will still be rough. In addition, processing and assembly there will be some deviation and some more difficult to find the hidden dangers. Therefore, the new factory sand making equipment must go through a certain period of time running in order to better ensure that the late sand making equipment normal and orderly work. For new users, may not understand the functional structure and performance characteristics of the sand making equipment, without reasonable mechanical running in the early stage, it is easy to appear sand making machine equipment is not efficient, or even less than expected Effect, since the early run-in is so important, how to make sand-making equipment through the run-in period of safety, sand making equipment to play to the extreme, so that the latter part of the production into formal. Sanding machine equipment running in general and supporting crushing, screening equipment run-in, sand making machine equipment operation between their own parts and raw materials between the run-in period should pay attention to several aspects: 1, before operation, please carefully read the manufacturer's sand making machine instructions and operating manual, familiar with the equipment performance. 2, no-load operation and load operation, under normal circumstances, the air load operation for 4 hours on it, in the empty load operation to check the flexibility of the next pulley, the machine is installed securely, there are no other noise, etc., in time Check, adjust the loose parts, to prevent loosening caused by parts wear. 3, pay attention to the running-in period of work load, work load not more than 80% of the rated work load, arrange the appropriate workload to prevent prolonged work due to test the heat caused by the phenomenon of the machine. 4, in the run-in period should pay attention to the lubrication of equipment, poor lubrication, will cause the scratches and occlusion of precision parts. 5, in the run-in we often have to check the data of the instrument to see if there is an exception. 6, standardize operations, timely inspection and maintenance.

评论

发表评论

此博客中的热门博文

Artificial aggregate production process and advantages and disadvantages

Wool sand making machine by crushing, screening, grinding, washing the resulting sand and gravel. In the absence of natural sand areas, often using artificial aggregate pouring concrete. Artificial aggregate production process are: wool mining, processing coarse aggregate, fine aggregate processing, screening, after washing reserves and transportation. Advantages of artificial aggregate are: ① wool stope nearest arrangements, reduce storage, loading and transport links, saving investment; ② to adjust production mix than the aggregate of all levels make full use of wool, save mining cost; ③ artificial aggregate particle size distribution is good, save cement, fresh surface roughness to increase bond strength, good mechanical properties. The disadvantage is the need to increase drilling blasting, crushing, sieving, washing, sand and other processes, the process is cumbersome, install more equipment and a greater direct costs of the system. Wool sand by crushing, screening, grinding, wa
阅读全文

Raymond Mill grinding system new advantages

Raymond Mill is a kind of grinding equipment that we commonly use in industrial ultrafine mill . It is suitable for limestone, calcite, marble, talc, gypsum, barite, fluorite, zeolite, manganese ore, ilmenite, phosphorus Minerals, bentonite, starch, kaolin and other stones with a hardness of less than Mohs 7 are ground and used in a wide range of applications, all of which are inextricably linked to its new grinding system. So what technology is applied to the grinding system used by Raymond Mill? 1. The new technology adopts a new vertical roll device. The grinding roller and the grinding ring are always in balance during the grinding process to form a uniform line contact grinding zone. The height of the grinding roller and grinding ring is increased from the original 160 mm to 200 mm, which increases the grinding contact area to a greater extent. 2. The classifier adopts a forced turbine classifier to extend the granularity of the finished product from the original 80-325 mesh range
阅读全文

New sand maker consolidates infrastructure construction

Since the 18th National Party Congress, our country has been inclined tocontinue to invest heavily in infrastructure to promote economicbooming, which will further expand the market demand for vsi sand making machine and gravelaggregate. In the face of the huge gravel aggregate demand, it isnecessary for gravel equipment R D manufacturer to activelyprepare for high-tech sand making machine to help the rapid development of economy. Sand making equipment is the key to the production of high-quality sandand gravel aggregate, the quality of sand and gravel aggregates directlyaffects the quality of infrastructure works. For a long time, theoverall technical level of sand making is low; facing increasinglystringent technical and quality requirements in the market, China sandmaking machine manufactures require to take active innovation, furtherincrease R D investment on technological application to meet thehigh standards and high demand of the market. Hongxing machine deeply understands
阅读全文